Summary :

Xbox 360 Controller

How to connect Xbox 360 controller to PC? This article from MiniTool will show you how to connect a wired or wireless Xbox 360 controller to a Windows PC peculiarly for Windows 10 users. If you desire to use your Xbox 360 controller on a Windows PC, check out this post now.

Quick Navigation :

  • Connect a Wired Xbox 360 Controller to a Windows PC
  • Connect a Wireless Xbox 360 Controller to a Windows PC
  • Bottom Line
  • User Comments

The outset function volition show you how to connect an Xbox 360 wired controller to a Windows PC with detailed steps. If you lot use a wireless Xbox 360 controller, you can skip straight to the second office to connect the Xbox 360 controller to a Windows PC wirelessly.

Connect a Wired Xbox 360 Controller to a Windows PC

If you are using a Xbox 360 wired controller, you can follow these steps to install your Xbox 360 wired controller on Windows 10.

Footstep 1. Plug the USB connector of your Xbox 360 controller into whatever USB 2.0 or 3.0 port on your Windows PC.

Pace 2. Then Windows 10 volition automatically install drivers for the Xbox 360 controller. Just look patiently and Windows will download or install the related commuter software very rapidly.

Step 3. When you run across the pop-up notification that shows the drivers have been installed, you lot tin employ your controller immediately.

Stride four. Open a game that support your controller and then press a button, pull a trigger, or motility a stick on the controller to test if your controller works properly.

Tip:

  • If the Xbox 360 wired controller is not detected past your Windows PC, endeavour re-plugging it into a different USB port, and so try again.
  • If your controller all the same does non piece of work, endeavour installing latest Windows updates and then try over again.

Connect a Wireless Xbox 360 Controller to a Windows PC

If you own a wireless Xbox 360 controller, yous can connect the Xbox 360 wireless controller to a Windows PC with an Xbox 360 Wireless Gaming Receiver. Then you can follow the steps beneath to setup a wireless Xbox 360 controller on a Windows PC and to play games with it.

Step 1. Prepare an Xbox 360 wireless gaming receiver. If you don't take one, yous can purchase a wireless receiver on Amazon, which may cost you near $10 to $20.

Step two. Insert the gaming receiver's USB connector into an USB 2.0 port on your Windows figurer.

Note: If USB ports on the front of your computer doesn't piece of work, endeavour using one of the ports on the back of your figurer.

Step iii. Once it is plugged in, you volition come across a dark-green low-cal appeared on the receiver, which indicates that the unit is working properly.

Step four. Install software to make sure the gaming receiver and the wireless Xbox 360 controller to properly sync with ane another.

  • If the Add New Hardware Wizard automatically appears on your PC, select Install the software automatically (Recommended), and then select Next. Then follow the prompts to install the software driver.
  • If the wizard fails to install the software, employ the installation disc that came with your Xbox 360 Wireless Gaming Receiver to install the software from the disc. Insert it into your Windows PC'due south main optical bulldoze and follow the on-screen pedagogy to finish the installation.
  • If you don't have the disc, you can install the software past downloading it from the Xbox 360 Wireless Controller for Windows link. The Windows 7 drivers will besides piece of work for Windows 8 and Windows 10. But select the proper operating system and language, and click the Download push.

Notation: You may be required to restart your computer subsequently the installation is completed.

Pace 5. Then you need to turn on the Xbox 360 wireless controller. Press and hold the Xbox Guide push button to turn on it.

Step 6. On the gaming receiver, printing the Connect button. Information technology is a small round button located near the heart of the receiver.

Step 7. The lights on the controller and on the receiver will flash green, which signal that the device is trying to institute a connexion. When the lights end flashing and one of the lights around the Guide button remains lit, this means that the controller is continued.

You can press the controller's buttons, pull the triggers and move the stick to ensure the controller is functioning properly. After that, you can relish the games on your Windows PC.

xbox 360 emulator thumbnail

This article will show you pinnacle 3 Xbox 360 emulators that can be used on Windows PC. With Xbox 360 emulators, you can play Xbox games on your Windows PC directly.

Bottom Line

The higher up is all you need to do if you lot want to connect an Xbox 360 controller to a Windows PC. And depending on what Xbox 360 controller you use, the steps can be rather simple. Now open a game that supports the Xbox 360 controller and whether if your controller works properly.

If you are using Xbox I controller and want to know how to connect Xbox One controller to a Windows PC, you lot may cheque out this post listed beneath.

connect xbox one controller to pc thumbnail

This post will evidence you how to connect Xbox 1 controller to PC with 3 dissimilar methods. If you want to utilize Xbox One controller on PC, check out the post now.